Rs 125 Crore, a Billion Bottles: Chemco's New rPET Plant Raises the Stakes for PET Collectors
At a glance
- Chemco Group commissioned a food-grade rPET bottle-to-bottle recycling facility in Sanand, Gujarat, on 18 November 2026, at an investment of about Rs 125 crore.
- The plant is designed to recycle more than 1 billion post-consumer PET bottles a year into food-grade rPET.
- Its output is US FDA and EFSA approved and fully compliant with FSSAI requirements for food-contact use.
- UFLEX recycled 552 million PET bottles in the second quarter of 2026-27, its results disclosed on 16 November 2026.
- Category I rigid packaging must contain 40% recycled content in 2026-27, rising to 60% from 2028-29.
Chemco Group has commissioned a state-of-the-art food-grade rPET recycling facility in Sanand, Gujarat, the company announced on 18 November 2026. The project represents an investment of about Rs 125 crore and is designed to recycle more than 1 billion post-consumer PET bottles a year, converting them back into high-quality, food-grade recycled PET suitable for direct food and beverage packaging. Chemco describes it as true end-to-end bottle-to-bottle recycling at industrial scale. The recycled PET produced at the facility is US FDA and EFSA approved, and fully compliant with FSSAI requirements for food-contact applications in India. Chemco Group has worked in PET packaging for over three decades, supplying rigid and flexible packaging to domestic and international brands.
The Chemco announcement lands in the same week as a second large number from the rPET sector. UFLEX disclosed alongside its second quarter 2026-27 results on 16 November 2026 that it processed 552 million post-consumer PET bottles during the quarter, and recycled 2,603 metric tonnes of post-consumer multi-layered packaging and aseptic packaging waste. The jump follows the commissioning of UFLEX's dedicated recycling unit in Noida, Uttar Pradesh, on 30 April 2026, which added 36,000 metric tonnes of annual recycled PET chip capacity and 3,600 metric tonnes of recycled multi-layered plastic capacity. The Noida hub now holds aggregate annual capacity of 46,020 metric tonnes for post-consumer recycled PET chips and 13,200 metric tonnes for recycled multi-layered plastic granules. Across six sites in India, Mexico, Egypt and Poland, UFLEX manages combined annual capacity of 79,020 metric tonnes for PCR PET chips and 34,897 metric tonnes for recycled multi-layered plastic granules. Noida is the only facility in its network holding dual clearance from the US FDA and FSSAI for PCR PET chips. The chips are converted into 100% rPET-content packaging films sold under the ASCLEPIUS brand.
A third plant shows the same direction. RiBotl Solutions operates a Starlinger recoSTAR PET 165 bottle-to-bottle recycling line in Silvassa, about 160 km north of Mumbai, commissioned in the first half of 2025, with capacity to produce up to 16,000 metric tonnes a year of bottle-grade rPET pellets. It secured FSSAI authorisation for its PET recycling process in March 2026, which allows it to supply food-contact rPET for beverage bottles, trays and food containers.
The demand behind this build-out is a mandate, not a trend. Category I rigid packaging, including beverage bottles and trays, must contain 30% recycled content in 2025-26, rising to 40% in 2026-27, 50% in 2027-28 and 60% from 2028-29. The Food Safety and Standards Authority of India authorised 17 recycled PET manufacturing plants in March 2026, unlocking an estimated 300,000 tonnes of annual capacity. The Association of PET Recyclers Bharat has stated that installed capacity is sufficient to meet the 40% requirement for 2026-27, with expansion expected to reach about 750,000 tonnes by March 2027. On 2 November 2026, FSSAI issued draft regulations to permit wider use of recycled plastic in food-contact packaging, allowing chemically recycled polyethylene and polypropylene through the monomer route and recycled polymers in the outermost layer of multilayer formats. Objections and suggestions may be submitted within 60 days from 3 November 2026. The proposal extends a pathway already established for PET, which FSSAI permitted for food packaging in a March 2025 amendment.
India already collects PET bottles at a rate most materials would envy. PET bottle usage reached 1.9 million metric tonnes in 2024-25, with a recycling rate of 92% in the same period, according to the Indian Centre for Plastics in the Environment. More than 90% of the country's PET bottle waste is recovered through the informal waste collection network. The constraint is not collection. It is quality: food-grade plants need clean, clear, sorted bales, and the premium sits with the bales that meet that standard.
That shows in today's prices. The Recykal Times price projection for 19 November 2026 puts PET bottle clear at Rs 57.13 to Rs 59.34 per kg in Gujarat, Rs 58.17 to Rs 60.44 in Uttar Pradesh, Rs 56.56 to Rs 58.98 in Uttarakhand and Rs 55.16 to Rs 57.49 in Odisha. Green bales sit about Rs 10 to Rs 12 lower, at Rs 46.27 to Rs 48.38 in Uttar Pradesh, Rs 45.21 to Rs 47.45 in Odisha and Rs 46.17 to Rs 48.34 in West Bengal. The gap between clear and green is the market paying for food-grade suitability.
What this means for you
If you collect or trade PET bottles, sort by colour and keep clear bottles separate, clean and dry. The plants being built now buy food-grade feedstock, and the clear-green price gap is the reward for doing that sorting. If you run a washing or flaking line, the buyers to chase are the FSSAI-authorised food-grade plants, because their demand is locked in by the 40% mandate for 2026-27. If you hold mixed or green bales, know they sell at a discount of roughly Rs 10 to Rs 12 per kg against clear, and plan your buying price around that gap.

Discussion
Be the first to comment.